Assign the default gateway of PC0 as 192.168.10.1.Select the PC, Go to the desktop and select IP Configuration and assign an IP address, Default gateway, Subnet Mask.
Assign IP Addresses to every PC in the network.Router(config-if)#interface FastEthernet0/1 %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up Type interface FastEthernet0/1 to access GigabitEthernet0/0 and Configure the FastEthernet0/1 interface with IP address 192.168.20.1 and Subnet mask 255.255.255.0.Įnter configuration commands, one per line.Type interface FastEthernet0/0 to access FastEthernet0/0 and Configure the FastEthernet0/0 interface with the IP address 192.168.10.1 and Subnet mask 255.255.255.0.Type config t(configure terminal) to access the configuration menu.Type enable to activate the privileged mode.Press ENTER to start configuring Router1.From this network, it can be observed that the router handles data transfers between multiple devices. The network simulation status is successful. After forming the network, to check network connectivity a simple PDU is transferred from PC0 to PC1. Computers are connected with routers using a copper straight-through cable. In this network, a router and 2 PCs are used. ISRO CS Syllabus for Scientist/Engineer Exam.ISRO CS Original Papers and Official Keys.GATE CS Original Papers and Official Keys.